XG700 User's Guide
109/266
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
5.8 Uplink Filter Commands
This section explains the commands related to uplink filter configuration.
5.8.1 show uplink
Function
Display configuration of uplink domain and the state of downlink member ports.
Prompt
xg>, or xg#
Command syntax
show uplink
Command Type
Operation management command
Output format
xg(config)# show uplink
Uplink Domain Information 2006/03/17-14:35:25
===============================================================================
Domain Port-Function Ports-Membership
------ ---------------- -------------------------------------------------------
1 Uplink(Active) port 1 10 11
Uplink(Inactive) port 2
Downlink port 5 6
agg-port 2 3
2 Uplink(Active) port 3 4
Uplink(Inactive) None
Downlink port 5
agg-port 2
===============================================================================
Domain
The domain ID of uplink group is displayed.
Port-Function
The port state belonging to uplink domain is displayed.
Display
Meaning
Uplink(Active)
Defined Uplink port and link status is good.
Uplink(Inactive) Defined Uplink port and port is NOT working. When port becomes
working, port status will be changed active.
Downlink
Defined the membership of downlink ports.
Ports-Membership
Display the membership belonging to uplink domain.
Example
Display configuration of uplink domain.
xg# show uplink