XG700 User's Guide
159/266
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
Output format (if “mrouter” is specified)
Only the multicast router information is extracted from the IGMP snooping information and displayed.
xg# show ip snooping mrouter
IGMP Snooping Information(Multicast Router) 2005/04/24-22:19:52
===============================================================================
Vlan Type Mrouter ports
---- ------- -------------
1 static port 5
2 dynamic port 6
----------------------------------------------------------------------------
===============================================================================
Output format (if “group” is specified)
Only the multicast group information is extracted from the IGMP snooping information and displayed.
xg# show ip snooping group
IGMP Snooping Information(Multicast Group) 2005/04/24-22:20:56
===============================================================================
Vlan Multicast Group Ver Member ports
---- --------------- --- ---------------------------------------------------
1 225.0.0.1 2 port 1 5
2 225.0.0.2 2 port 1 5
----------------------------------------------------------------------------
===============================================================================
5.14.2 ip snooping protocol
Function
Enables global IGMP snooping.
Use the no form to disable the snooping.
Prompt
xg(config)#
Command syntax
ip snooping protocol igmp
no ip snooping protocol igmp
Parameter
protocol igmp
Enables global IGMP snooping of the XG700.
Command type
Configuration command
Default
None
Message
% port %1$ is membership of uplink-domain %2$.
Explanation
The displayed port is used as an uplink.
[[Inserted string]]%1$: Port number
[[Inserted string]]%2$: Uplink domain number
Solution
Clear the uplink domain before enabling IGMP snooping.
Note
IGMP snooping and uplink filter function cannot be used at the same time.
Example
Enable IGMP snooping of the XG700.
xg(config)# ip snooping protocol igmp