XG700 User's Guide
187/266
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
5.15.14 show statistics qos-priority-traffic-counts
Function
Displays the traffic (the number of frames) of each port in different QoS priorities after the startup of system hardware.
Prompt
xg> or xg#
Command syntax
show statistics qos-priority-traffic-counts
Command type
Operation management command
Output format
xg# show statistics qos-priority-traffic-counts
Qos Priority Traffic Statistics(Total Frame Counts) 2005/08/22-19:49:53
========================================================================
[No.1]
Port : 1
Priority-0 Counts : 12345678901234567890
Priority-1 Counts : 2354235234
Priority-2 Counts : 235434250
Priority-3 Counts : 12314657
Priority-4 Counts : 235477689352374
Priority-5 Counts : 246364564564546
Priority-6 Counts : 1234453456
Priority-7 Counts : 1436434623
[No.2]
[No.]
Displays statistics of each port.
Port
Displays switch numbers.
Priority-0 Counts to Priority-7 Counts
Displays the cumulative number of frames (in different QoS priorities) which have been received from the startup of this
command.