XG700 User's Guide
3/266
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
About this Manual
This section describes target readers, contents, notations, etc. of this guide.
Target Readers and Required Knowledge
This guide has been written for administrators, who are in charge of network construction, maintenance, and management.
To use this guide, the following knowledge is required.
Basic knowledge of networks, the Internet, and intranet
Basic knowledge of system security
This guide omits explanations of network protocol terms.
Contents
This guide to the XG700 is composed of the following chapters.
Chapter 1. Features and Functions
Describes the features and functions.
Chapter 2. Using the CLI
Describes operating environment of CLI and how to operate CLI.
Chapter 3. Installation
Describes the necessary installation procedures.
Chapter 4. Functions and Procedures for Setting Functions
Describes how to use the console screen.
Chapter 5. Command References
Describes how to use the commands.
Chapter 6. Managing the XG700
Describes the management of the XG700.
Chapter 7. Troubleshooting
Describes how to solve problems in the XG700.
Appendix A. Event Logs
Describes the contents of messages reported by the XG700 and actions to be taken for each message.
Appendix B. SNMP Traps
Describes message format of SNMP traps.
Appendix C. List of MIBs
Describes the list of MIBs supported by the SNMP agent
Related Manuals
The following are XG700 related manuals. Use these manuals as necessary.
XG700 Series Hardware Guide
Describes the hardware of the XG700.
Symbols Used in This Guide
The symbols used in this guide have the following meanings.
indicates useful information related to using the XG700.
indicates precautions which must be taken when using the XG700.
indicates supplementary information.
indicates related matters such as operation procedures, etc.
