XG700 User's Guide
78/266
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
5.4.17 banner
Function
Sets the banner string to display when logging in to the XG700.
Use the no form to deter the banner string to display.
Prompt
xg(config)#
Command syntax
banner login LINE
banner login default
no banner
Parameter
login LINE
Sets a banner string.
login default
Returns the banner string to default ("XG700 firmware identification information").
Command type
Configuration command
Default
"XG700 firmware identification information"
The firmware identification information is the same information as displayed in FirmWare[1] or FirmWare[2] of the "
show
system information
" command.
Example
Set the banner string to "Welcome to XG700."
xg(config)# banner login Welcome to XG700