To Switch OFF:
Simply turn the transit latch to
OFF / LOCK.
Detector model FD-9R
(colour may vary)
Fit the supplied 9V battery, polarity marked. Power up via left hand ON/OFF
button
.
The mode button is not used.
The User can switch the sounder On or OFF, as required with the right hand
press button.
Bright LED's next to the red pick-up window show above/below or SET LEVEL.
Both side & rear LED's simply repeat the main front display.
Use with or without its staff mounting bracket. Spare brackets are available.
Detector Procedure:
SWITCH
ON the *OUTDOOR button.
Face the detector towards the EK-226P & find the centreline of the laser
beams via the red pick-up window. Obtain a continuous tone for perfect level.
Mark out.
Outdoor use
....
If the sun is low in the sky & shining into the red window, shield it with a
cupped hand to prevent false readings. Positioning the EK-226P laser itself in
full sun is no problem but the detector window can in some instances, be
affected by direct bright sunlight or reflections. So please take extra care!
Important
Only switch on the Outdoor button when you need a "pulsed output" to
operate the detector. This will save battery power & make the normal red
3
