1 The unit is usually in locked position when it is not in
use. Please slide the on/off button to level position or
pendulum-locked position when you start to work.
2 Put the laser on leveling surface during the work.
3 If the surface exceeds self-leveling range of ±4°, the
self-leveling function can not work well.
4 Put the unit to leveling surface in level working
position, if the laser slowly flash but within self-
leveling range, it means low battery, otherwise it
means out of self-leveling range.
5 Make sure to put the unit in power off position when it
is not in use, Take out the batteries.
6 The unit can connect with tripod to work in any height
and position.
Specifications
5
Summary of Contents for FDG231
Page 1: ...FDG231 User Manual 1 ...
