C17AK0006 REV.1SLIMBOX-V, INDOOR/OUTDOOR ENCLOSURE-4F
ISSUE DATE 8/9/2017
pg. 9
5.
Splitter Installation
1.
Attach the splitter on the top of the splice flip tray.
2.
If the output ends of the splitter are pre-terminated then route the connectors to the base of
the enclosure and attach the connector into the adapter. The excess fiber will be stored in
the fiber management at the top of the splice flip tray.
3.
If the splitter output and inputs are to be spliced to pigtails attach the pigtail connector into
the adapter on the base of the enclosure to the connector of the drop lead. Then take the
ends from the front of the base to the rear of the splice flip tray. Take the splitter output
leads and splice the respective pigtail to the splitter output fiber.
Splice Flip Tray
Indoor/Outdoor Cable entry
or tubed fiber from an OSP
cable
Splitter Attachment
Splice Flip Tray Pigtail
entry point. Pigtail is
routed counter clockwise
