11
KNOW YOUR PRODUCT
Fitting the wheels (5) (Fig. 1):
1.
Place the bolt through one wheel and then a washer. Now
through the hole in the wheel bracket, below the tank.
2.
Fasten the wheel bolt in position with a washer, spring
washer and nut.
3.
Repeat steps 1 and 2 to fit the second wheel on the
opposite side of the tank.
Fitting the supporting feet (8) (Fig. 2):
1.
Place the support foot bolt up through the hole in the
supporting bracket.
2.
Secure the support foot in place with the nut.
3.
Repeat steps 1 and 2 to fit the second foot.
Replacing the air breather (9) (Fig. 3):
1.
Remove the transportation plug from the oil filler opening with a screwdriver
2.
Screw the supplied air breather into the oil filler opening.
Note:
The compressor pump is shipped with oil but must be
checked before putting the equipment into operation. Refer
page
15
"Check the oil level at regular intervals"
ASSEMBLY (cont.)
Fig. 1
Fig. 2
Fig. 3
5
8
9
Summary of Contents for FBACVT-5030
Page 19: ......
