12
Assembly of the intake air filter (2) (Fig. 4):
The intake air filters should come
pre assembled. However if assembly is
needed follow the instructions below.
1.
First place the foam pad into the recess
in the lower half. Then place the cover
onto the lower section.
2.
Secure the assembly by tightening the screw into the top of the filter.
Installation of the intake air filter (2) (Fig. 5)
1
. Remove the shipping plug with a screwdriver or similar
2.
Screw the assembled intake air filter securely to the
compressor by rotating it clockwise
3.
Repeat this process for the second intake air filter.
ASSEMBLY (cont.)
IMPORTANT!
Never use the air compressor without a filter. Check that the filter is
securely fitted at all times.
Fig. 4
Fig. 5
2
Summary of Contents for FBACVT-5030
Page 19: ......
