Full Boar FBACVT-5030, Instruction Manual

5

Congratulations on purchasing a Full Boar V-Twin Air 

Compressor. 
The Full Boar V-Twin Air Compressor provides the user with 

a wide range of options while combining solid performance 

output. The air compressor delivers a high efficient flow rate 

and is ideal for applications up to 10 bar.

INTRODUCTION

WARNING!

 When using mains-powered equipment, basic safety precautions,  

including the following, should always be followed to reduce risk of fire, electric 

shock, personal injury and material damage.

SAFETY INSTRUCTIONS

ELECTRICAL SAFETY

Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for future reference.

The electric motor has been designed for 230V and 240V only. Always check that the power 

supply corresponds to the voltage on the rating plate.

Note:

 The supply of 230V and 240V on Full Boar tools are interchangeable for Australia and 

New Zealand. 

To reduce the risk of electric shock, a residual current device (rated 30mA or less) must be 

used.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer 

in order to avoid a hazard.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool. Before use, 

inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead 

if damaged or defective. When using an extension lead on a reel, always unwind the lead 

completely. Use of an extension lead not suitable for the power input of the tool or which is 

damaged or defective may result in a risk of fire and electric shock.