19
Spark plug
When the engine will not start and everything has been checked, it is likely the
spark plug will need replacing. The spark plug is not covered under warranty.
To replace or clean the spark plug:
1.
Remove the spark plug lead.
2.
Using a spanner (not included), remove the spark plug.
3.
Clean the electrode with a metal brush and remove any carbon build-up.
4.
Using a thickness gauge (not included), check for the right gap (0.6-0.8mm)
between the centre electrode and side electrode.
5.
Refit the spark plug and tighten with a spanner.
MAINTENANCE (cont.)
Note: Ozito Industries will not be responsible for any damage or injuries caused by
the repair of the plate compactor by an unauthorised person or by mishandling of the
grinder
Spare Parts
Limited spare parts are available subject to availability. Please contact your local
Bunnings Special Orders Desk to order the required spare parts.
