9
Hooks
Hooks
Fig.4
Fig. 5
Fitting the trolley wheel assembly (3)
1.
Line up the holes in the trolley wheel
assembly (3) and engine deck (12). The
arms of the wheel assembly frame should
sit outside the engine deck. Slide M10 x 30
bolts & washer (17) through the holes from
one side, then nyloc nuts from the other
side and tighten. (fig. 4)
2.
The trolley wheel assembly (3) makes
moving the plate compactor easier when it
is not being used. Before compacting, fold
up the trolley wheel assembly (3) and secure
with hooks fixed on the handle assembly (2)
(fig. 5).
ASSEMBLY (cont.)
