12
Fitting the transport handle
1.
Return the compressor to
an upright position (Fig. 11).
2.
With the hex key supplied
(22), loosen the 2 grub
screws on both transport
handle fixtures (20)
(Fig. 12).
3.
Insert both arms of the transport handle (10) into the
transport handle fixtures (22) at the front of the tank
(Fig. 13).
4.
With the hex key supplied (22), tighten the 2 grub screws
on both transport handle fixtures (20) (Fig. 14).
Replacing the oil sealing plug
1.
Remove the transportation
cover from the oil filler
opening with a screwdriver
(Fig. 15).
2.
Insert the supplied oil
sealing plug (15) into the
oil filler opening (Fig. 16).
Fitting the air filter
1.
Use a screwdriver to
remove the transportation
cover from the air filter
connection (Fig. 17).
2.
Screw in the supplied
intake air filter (1) (Fig. 18).
ASSEMBLY (cont.)
Fig. 13
Fig. 18
Fig. 17
Fig. 16
Fig. 15
Fig. 14
Fig. 12
Fig. 11
