10
22. Image Position Correction
This setting allows user to adjust the thermal image up/down
and left/right in the clip-on mode, in order for the thermal
display to be positioned in the center of the daylight scope.
Short press of Super Controller (8) changes between vertical
and horizontal adjustments and rotating the Super Controller
adjusts the position. Once finished, exit the menu and settings
are automatically saved.
23. Table Position Correction
This setting allows user to adjust the Table menu position in
relation to the image viewed through the daylight scope,
allowing the table to be positioned either in the center of the
view, or away in any of the corners, as you prefer. Short press
of Super Controller (8) changes between vertical and
horizontal adjustments and rotating the Super Controller
adjusts the position. Once finished, exit the menu and settings
are automatically saved.
24. Restore Position Settings
This setting allows user to reset the image and table positions
to the factory settings.
25. Date Set
This setting allows user to set the date, as it would appear on
the video recording stamp. The date appears in YYYY-MM-DD
sequence. Rotate the Super Controller to change the year,
then switch to month by short-pressing the Super Controller
and repeat the same for day. Once day is adjusted, short-
pressing the Controller returns to the main menu.
26. Time Set
This setting allows the user to set the time, as it would appear
on the video recording stamp. Switch between HH:MM:SS by
short-pressing the Super Controller and adjust the time by
rotating the Super Controller. Please note the time is
displayed in military units, so 1pm = 13:00, 6pm = 18:00,
11pm = 23:00 and so on.
27. Clear Video Record Storage
This selection allows you to format the memory card and
erase all video recordings from the card without connecting
device to the computer. To protect from accidental erase,
once this feature is selected, the device will ask you to confirm
this selection within 5 seconds by short-pressing the Menu
button, otherwise the function will not activate.
28. Language
This setting allows user to select menu language. 4 languages
are available: ENGLISH
– GERMAN – SPANISH – RUSSIAN
29. Software Version
