TRACKMASTER
Ch. 3
Power Requirements
317-160-284 Rev 6
TMX428 Owner’s Manual
25
February 2021
Power Requirements
The TMX428 and TMX428CP are designed to operate on a dedicated 110-120 VAC 20-amp power
supply or optional 220/240 VAC 15-amp. Make sure that the treadmill is connected to an outlet that looks
like the following illustration.
This product is equipped with a three-wire grounding-type plug. The plug will only fit into a grounding-
type outlet. This safety feature must not be disabled. Contact a qualified electrician if you are unable to
insert the plug into your outlet, or uncertain if the outlet meets local electrical codes. Polarized outlets
such as NEMA 5-20 and CEE7/7 must be verified for proper polarity configuration before plugging in the
device. Incorrect polarization of the outlet could cause failure of onboard electrical components or cause
electrical shock. Proper grounding is necessary for the equipment to meet acceptable current leakage
standards consistent with the standards to which it was certified.
110-120 VAC
NEMA 5-20R
Single Phase
220/240 VAC
NEMA 6-15R
Split Phase
230 VAC
AS/NZS 3112
Option
220/240 VAC
CEE 7/7 EURO
Option
250 VAC
Type N BRAZIL
Option
230 VAC
BS1363
Option
240 VAC
BS546 3 PIN
Option
250 VAC
Type K DANISH
Option
240 VAC
GB 1002
Option
250 VAC
Type H ISREAL
Option
250 VAC
Type L ITALY
Option
250 VAC
Type J SWISS
Option
3
Summary of Contents for TRACK MASTER TMX428
