fully Nolan, Assembly Instructions Manual

5

Risk of injury through operating damaged products 

If the system is damaged, it may no longer be safe to use. Continuing to operate it 
entails a risk of injury. Caution must be exercised to avoid system damage, especially 
to cables. 

- Ensure interconnecting cables are run loosely.

- Ensure all lines and cables are routed to avoid mechanical damage.

- Ensure cables are routed to allow height adjustments without damage to  

   the wiring

Risk of injury through crushing, pinching or other impact

If body parts become trapped inside the mechanisms of the table, or between the 
table and other objects, this may lead to injury through crushing, pinching and other 
impact. If the desk hits an obstacle, that obstacle might be damaged (scratching, 
marks, etc.)

- If an obstacle is encountered, or there are functional errors, stop  

   adjustment immediately.

- Make sure adjacent objects are placed at a minimum distance of 1 inch 

  from the table to prevent them from being squeezed or sheared.

- Make sure that there are safety gaps of at least 1 inch for movable parts. 

  (this also applies to elements that are attached above or below the table, 

    hanging from nearby walls, or building fixtures, such as open windows).

Risk of injury through unauthorized repairs

Unauthorized opening and improper repairs can cause danger and voids the product 
warranty. Unauthorized or unskilled personnel may not have the ability to avoid injury 
while attempting to open or make changes to the product, which may lead to injury 
through electric shocks, burns, or crushing.

- Never attempt to open the enclosure of the power hub.

- Only replace damaged components with original parts.

- Contact a professional authorised by the manufacturer to carry out    

   maintenance or repair

Risk of injury through technical error

The table system has a maximum load restriction and a duty cycle setting, which 
are designed to stop the system operating beyond its limits. Once the duty cycle 
has been reached (see technical data), the system automatically shuts itself off and 
cannot be until a certain time has elapsed. Attempting to override such functions may 
cause the system to malfunction and lead to injury.

- Do not exceed the maximum load stated in the technical data.

- If the duty cycle limit is reached, do not attempt to use the table.

- Do not attempt to override safety or system protection functions