3
Manual
FUMEX ME
EX
Foreword
FUMEX operates in the environmental technology sector
and specialises in extraction arms, fans, and filters for
all work environments. The company strives to create
work environments free from airborne contaminants.
Our products are manufactured using modern methods
and undergo extensive quality inspections. The products
comply with applicable safety- and environmental
requirements.
If you have any questions about FUMEX or our
products, please contact your dealer or the FUMEX
sales department.
1.2 Warranty
To preserve the validity of the warranty, it is forbid-
den to modify or re-engineer the product during the
warranty period without first obtaining prior approval
from FUMEX. This is also applicable to any spare parts
used which do not correspond to the manufacturer’s
specifications.
Damage caused by improper use of the product will
result in:
• the warranty being voided
• the EC Declaration and CE certification being
voided.
The warranty period is one year from the date of pur-
chase and covers the product and its constituent parts.
All manufacturing defects are covered by the warranty.
FUMEX replaces defective parts in accordance with NL 17.
FUMEX is not liable for any consequential or incidental
damage, or any loss of income as a result of or in con-
nection with the warranty case.
The onus is on the buyer to select the appropriate
product for the intended use. Any modifications to the
FUMEX product or its intended use will void the warranty.
1.3 Manufacturer
FUMEX AB
Verkstadsvägen 2
Tel. no.: +46 910-361 80
SE-931 61 Skellefteå
Email: info@fumex.se
Sweden
1 Introduction
1.1 The manual
To ensure your knowledge of the product, you must
read this manual before use.
The information in this manual is intended to facilitate
the installation, operation, maintenance, troubleshooting,
and repair of the product. The manual also provides
the user with a technical understanding and basic safety
instructions to minimise risks when working with the
product, as well as to increase the product’s service life.
The manual should be considered a part of the product
and should always be accessible and in close proximity
to the product.
The following symbols are referred to in the manual:
Safety instructions (applicable to people or
product) that must always be adhered to.
Risk of death or risk of personal injury or
damage to property.
Recommendations which convey important
information for an optimally functioning
product.
