14
EN
•
Operations must be followed up within 30 seconds,
from steps
2)
to
3)
. Otherwise the Index Search mode
will be cancelled.
•
To exit the Index Search mode, press
MENU
in step
2)
.
Or press
STOP
/
L
after step
3)
.
TIME SEARCH
If a tape includes both programmes recorded in the PAL
system and ones recorded in the NTSC system, this function
may not be operated correctly.
• Use the remote control for this procedure.
1)
Press
SEARCH MODE
twice.
2)
Press
PLAY
/
K
or
STOP
/
L
repeatedly until the desired
time appears.
3)
Press
REW
/
s
or
F.FWD
/
B
.
The VCR begins rewinding or fast forwarding to the
specified point.
When 0:00 is reached, the VCR will start playback
automatically.
Note: •
Time Search can be set up to 9 hours 59 minutes
(9:59).
•
This function will not operate in the Recording mode.
•
Operations must be followed up within 30 seconds,
from steps
2)
to
3)
. Otherwise the Time Search mode
will be cancelled.
•
To exit the Time Search mode, press
MENU
in step
2)
.
Or press
STOP
/
L
after step
3)
.
Copying a Video Tape
You can make copies of videotapes made by friends or relatives
for your own enjoyment.
WARNING:
• Unauthorized recordings of copyrighted video
tapes may be an infringement of copyright
laws.
Connect the recording VCR (this unit), playing VCR (another
VCR) and your TV as outline in the following diagram.
1)
Insert a pre-recorded videocassette into the playing VCR.
2)
Insert a blank videocassette, or one you want to record
over, into the cassette compartment of the recording
VCR.
3)
Press
SPEED/SYSTEM
on the remote control to select the
desired recording speed (SP/LP).
4)
Select “AV2” position on the recording VCR. See “Other
Connections”.
5)
Press
REC/OTR
on the recording VCR.
6)
Begin playback of the tape in the playing VCR.
7)
To stop recording, press
STOP/EJECT
on the recording
VCR, then stop playback of the tape in the playing VCR.
Note: •
For best results during dubbing, use the VCR’s front
panel controls whenever possible. The remote control
might affect the playback VCR's operation.
•
If video or colour fades in and out, you may be
copying a copy guarded video tape.
To Monitor the Recording
Turn on the TV and select the video channel on the TV.
A Status Display
To check the Counter, or Clock & Channel number, press
DISPLAY
. Each time you press
DISPLAY
, TV screen will
change as illustrated:
When you select the channel using the
number buttons
, select
the desired channel (position number).
Note:
If the on screen display or indicators on the front panel
show an abnormal reading or no reading, unplug the
VCR for 2 minutes, then replug it again.
Please note that language, clock, and timer settings will
be cleared after disconnection.
Maintenance
Cabinet Cleaning
• Wipe the front panel and other exterior surfaces of the
VCR with a soft cloth that has been immersed in lukewarm
water and wrung dry.
• Never use a solvent or alcohol. Do not spray insecticide
liquid near the VCR. Such chemicals may cause damage
and discolouration to the exposed surfaces.
Auto Head Cleaning
• This feature automatically cleans the heads as you insert or
remove a cassette to ensure a clear picture.
• The playback picture may become blurred or interrupted
even if the TV programme received is clear. This does not
mean that the recorded programme has been erased. This
problem is caused by dirt accumulated on the head after
long periods of use, or usage of rental or old tapes. In this
case, head cleaning requires highly technical expertise and
the nearest dealer should therefore be consulted. Clean
heads only when problems occur.
Service
Should your VCR become inoperative, do not try to correct
the problem by yourself. There are no user-serviceable parts
inside. Turn the unit off, unplug the power cord, and take the
unit to a Service Centre for servicing.
AV2 (DECODER)
AV1 (TV)
AUDIO
OUTPUT
AERIAL
RF OUT
R
L
to RF OUT
to aerial
socket
[Source (Playing) VCR <Monaural>]
(another VCR)
to 21-Pin
Scart Jack
[TV set]
(Use for monitoring)
[Editing (Recording) VCR]
(this unit)
Coaxial cable (supplied)
■
SP
0:12:34
■
SP
17:40
P02
<CLOCK and CHANNEL
NUMBER mode>
<COUNTER mode>
Press once.
Press once.
Press once.
<OFF mode>
29A-650(EN).fm Page 14 Wednesday, October 27, 2004 10:40 AM
All manuals and user guides at all-guides.com
