5
EN
Installation
Connecting the VCR
Basic Connection
1)
Disconnect the TV’s power cord from the AC outlet.
2)
Disconnect the VHF/UHF TV aerial coaxial cable from
the TV.
3)
Connect the VHF/UHF TV aerial coaxial cable to the
VCR.
4)
Connect the VCR to the TV using the coaxial cable.
5)
Plug the power cords of the VCR and TV into the AC
outlets.
Note:
If your TV has AUDIO input jacks, you may connect
the AUDIO OUTPUT L/R jacks on the back of this
VCR to the AUDIO input jacks on your TV.
Other Connections
Euro Scart (AV) Sockets
Your VCR is provided with two Scart sockets which you may
connect to other external devices with Scart sockets. We
recommend this connection to ensure a better audio and
picture quality.
Euro Scart cables are obtainable at your dealer.
AV1 (TV) Connection to TV
If your TV has Scart sockets, you may connect your VCR’s
AV1 (TV) scart socket to the Scart socket on the back of your
TV. Please see the instruction manual for your TV.
Note:
You may connect the VCR to your audio amplifier.
1)
Prepare an audio cable (not supplied).
2)
Switch off your audio amplifier.
3)
Insert one end of the audio cable into the corresponding
red and white AUDIO OUTPUT L/R socket at the back
of the video recorder and the other end into the
corresponding audio input socket at the audio amplifier.
AV2 (DECODER) Connection for Other External Devices
The second Scart socket AV2 (DECODER) is designated for
other external devices, e.g. decoder, another VCR, video
camera and so on.
Note:
If you want to connect a TV with Scart socket to your
VCR, the TV must be connected to the VCR through
AV1 (TV). A connection to AV2 (DECODER) will not
function correctly.
AV Front Terminals
When you copy a video tape, or watch a programme recorded
on an another source, use the AUDIO/VIDEO input jacks on
the front panel of the VCR.
Note:
When you connect a monaural VCR (another source)
to this VCR, connect the audio output jack of the
monaural VCR (another source) to the AUDIO L jack
of this VCR. The audio signal will be recorded in both
L and R channel equally.
External Input Mode
To receive the signal from an external source (decoder, video
camera, another VCR, etc.), connect the source to the AV2
(DECODER) socket, and press
CHANNEL
(
K
/
L
) or enter
“002” with the
number buttons
. “AV2” appears on the TV
screen. If you use the AV1 (TV) socket, press
CHANNEL
(
K
/
L
) or enter “001” with the
number buttons
.
“AV1” appears on the TV screen.
If you use the front AUDIO/VIDEO input jacks, press
CHANNEL
(
K
/
L
) or enter “003” with the
number buttons
.
“AV3” appears on the TV screen.
RF OUT
AERIAL
L
R
AUDIO
OUTPUT
R
VHF/UHF
MIXER
to AERIAL
to RF OUT
(Back of the unit)
to aerial socket
(TV)
UHF
VHF
[A/V television]
[Back of the VCR]
Audio/Video cable
(not supplied)
IN
AUDIO
L
R
L
R
AUDIO
OUTPUT
AV2 (DECODER)
AV1 (TV)
AUDIO
OUTPUT
AERIAL
RF OUT
R
L
AV1 (TV)
to 21-Pin
to 21-Pin Scart Jack
Decoder (Not supplied)
(TV)
to RF OUT
to aerial
socket
Scart Jack
[Back of the VCR]
L
R
AUDIO
OUTPUT
VIDEO
L AUDIO R
[Front of the VCR]
etc.
To the audio
output jack
[Another source]
To the video
output jack
Audio/Video
cables
(not supplied)
29A-650(EN).fm Page 5 Wednesday, October 27, 2004 10:40 AM
All manuals and user guides at all-guides.com