8
EN
If your TV has no scart input jack but has an
S-VIDEO input jack,
1)
Follow the steps
1)
to
4)
right under “Connecting to a
TV”.
2)
Connect the S-VIDEO OUT jack on this unit to the
S-VIDEO input jack on your TV.
3)
Connect the ANALOG AUDIO OUT jacks of this unit
to the analogue audio input jacks of your TV.
4)
Plug in the TV and this unit.
Note: •
The S-VIDEO connection only supplies video
(picture) in the DVD mode.
•
Set “DOLBY DIGITAL” to “PCM” for the AUDIO
setting in the setup mode.
Playing a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.
(Refer to page 24.)
For Better Sound (for DVD Features)
These 2 connections are optional for better sound.
1)
For clear digital sound quality, use the DIGITAL AUDIO
OUT (COAXIAL) jack for the connection to your digital
audio system.
•If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will produce
a strong, distorted sound or no sound at all.
Hints for connecting to a Dolby Digital
decoder, DTS decoder or MPEG decoder
• By connecting this unit to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Multi-channel Dolby
Digital surround sound as heard in the movie theaters.
• When this unit is connected to a DTS decoder, you can
enjoy Multi-channel surround system which reproduces the
original sound as truthfully as possible. Multi-channel
surround system is developed by the Digital Theater
Systems, Inc.
• A digital component with a built-in MPEG 2, Dolby
Digital
TM
or DTS decoder allows you to enjoy the surround
sound while producing the effecting of being in a movie
theater or a concert hall.
• If output is Dolby Digital encoded audio, connect to a
Dolby Digital decoder, and set “DOLBY DIGITAL” to
“BITSTREAM” in the AUDIO menu. (Refer to page 24.)
• If output is DTS encoded audio, connect to a DTS
decoder, and set “DTS” to “BITSTREAM” in the AUDIO
menu. (Refer to page 24.)
• If output is MPEG encoded audio, connect to an MPEG
decoder, and set “MPEG” to “BITSTREAM” in the
AUDIO menu. (Refer to page 24.)
Hints for connecting to an MD deck or DAT
deck
• The audio source on a disc in a Dolby Digital Multi-
channel surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Unless connected to a Dolby Digital decoder, set “DOLBY
DIGITAL” to “PCM” in the AUDIO menu. Playing a
DVD using incorrect settings may generate noise
distortion, and damage the speakers. (Refer to page 24.)
• Set “DOLBY DIGITAL” and “MPEG” to “PCM” and set
“DTS” to “OFF” in the AUDIO menu for connecting to
an MD deck or DAT deck. (Refer to page 24.)
2)
For dynamic sound effects, use the ANALOG AUDIO
OUT jacks for the connection to your audio system.
VCR
AV2 (DECODER)
DVD/VCR
AV1 (TV)
L
R
DVD
COAXIAL
DIGITAL
AUDIO OUT
ANALOG
AUDIO OUT
S-VIDEO
OUT
L
R
S-VIDEO
IN
AUDIO
IN
TV
DVD/VCR
S-Video cable
(not supplied)
Audio cable
(not supplied)
(Back of the unit)
COAXIAL
Digital Audio
Input jack
Coaxial
cable
(not supplied)
DVD/VCR
Dolby Digital decoder,
DTS decoder or
MPEG decoder etc.
COAXIAL
DIGITAL
AUDIO OUT
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
L
R
AUDIO SYSTEM
DVD/VCR
Audio
L
R
ANALOG
AUDIO OUT
Audio cable
(not supplied)
E8BK1BD(EN).fm Page 8 Tuesday, April 4, 2006 6:29 PM
