FUNAI F313CC Owner'S Manual Download

Page: 21 / 32

- 21 -

9I03

Push(es)

Display

Recording length

1 push

(normal recording)

2 pushes

0:30

30 minutes

3 pushes

1:00

60 minutes

17 pushes

8:00

480 minutes

Begin OTR

Press the REC/OTR button on the
TV/VCR as many times as needed.
The recording length will be deter-
mined by the number of times you
press the REC/OTR button. Each
additional push will increase the recording time by
30 minutes. It is set up to 8 hours.

OTR(2 : 30)

Avoid over lap of programs ...

There is a chance that a program will not be recorded
when programs overlap;

•

The program with an earlier start has priority.

•

Once the earliest program finishes, the overlapping
programs will begin recording in sequence.

•

The illustration below demonstrates the sequence
of recordings.

Select “TIMER PROGRAMMING”

Press the MENU button on the
remote control.
Confirm “TIMER PROGRAM-
MING” is pointed by pressing the
PLAY/

button.

And press the F.FWD/

button.

•

If you have not yet set the clock, “MANUAL
CLOCK SET” appears. If so, follow steps [3] to
[8] on page 11. Then set the timer recording.

Select your desired program position (1~8)

Press the PLAY/

or STOP/

but-

ton to select the desired program
position.
Then, press the F.FWD/

button.

Set the channel number

Press the PLAY/

or STOP/

but-

ton until the desired channel num-
ber appears.
(Example: CH61)
Then, press the F.FWD/

button.

Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be recorded is selected on
the cable box or satellite box.

Select once, every day or weekly recording

For once recording :

Press the PLAY/

(up) button

until the desired date appears.
(Example: “7/05” for July 5th).
Then, press the F.FWD/

but-

ton.

TIMER RECORDING

9:00AM

10:00AM

12:00PM

Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM

11:00AM

Recording Sequence

*Recording period is SHADED

You may set the TV/VCR to start and end a record-
ing while you are away. You can set 8 programs to
record on specific days, daily or weekly within a 1
year period.

In the example below, the timer is being set to record:

DATE:

July 5th, 2002

SETTING TIME: from 7:30PM to 8:50PM
CHANNEL:

CH61

TAPE SPEED:

Make sure ...

•

If a cable box or satellite box is connected with the
TV/VCR you will be limited to record only one
channel. And the channel selector on the TV/VCR
must be selected to the output channel of the boxes
CH 3 or CH 4 and then the actual channel to be
recorded must be selected on the boxes.

•

Clock must be set to the correct time and date
before setting the timer.

•

TV/VCR power must be turn on to program it.

•

Insert a cassette tape with its erase prevention tab
in place. (If necessary, rewind or fast forward the
tape to the point at which you want to begin
recording.)

•

The channel you want to record is properly set in
advance.

– M E N U –

TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH

– TIMER PROGRAMMING –

CH DATE

BEGIN END

- -

-/- - - - -

-:- -

-:- - - -

- -