function Innovation & Technology AS
- 12 -
Manual – KNX MultiLight Art.nr 44001
Doc.no. D-TS-ML-K-005-A
Figure 7 - Raw and calibrated lux values
The calibration factor is set to 1 and the raw value is used if “0” is written to the “Current
value (lux)” object. The object should be set to 0 to clear the current calibration before
re-calibrating the lux level. The lux level calibration is limited to 2 times the raw lux level,
so the calibration is limited to 2000 if the raw lux level is 1000.
5.3
Block diagram
Figure 8 - Block diagram of movement and lux sensor