function Innovation & Technology AS
- 27 -
Manual – KNX MultiLight Art.nr 44001
Doc.no. D-TS-ML-K-005-A
8
Binary inputs
8.1
Parameter
KNX MultiLight has two digital inputs (1 and 2) that can be used as a simple switch,
dimming switch or shutter control switch. The simple switch can be either configured as
on, off or toggle. Detection of short and long switch operation will be determined for
dimming- and shutter switch.
8.1.1
Switch
Switch functionality where the object is high or low depending on the detection of rising
or falling edge for the input.
Parameter choices for the Switch-function:
Rising edge – On
Rising edge – Off
Rising edge – Toggle
Rising edge – On, Falling edge – Off
Rising edge – Off, Falling edge – On
8.1.2
Dimming
Light dimming functionality with one communication object for "Short operation – Switch”
and one for "Long operation - dimming".
Parameter choices for the dimming-function:
Reaction short operation: "Off", "On" or "Toggle"
Reaction long operation: "Dim darker", "Dim brighter" or "Dim brighter /darker"
Please note that the action for long operation is locked to “Toggle” if the reaction for
short operation is “Toggle”