function Innovation & Technology AS
- 29 -
Manual – KNX MultiLight Art.nr 44001
Doc.no. D-TS-ML-K-005-A
8.3
Object list
Table 7 - Object list for Binary Input 1 and Binary Input 2
ID
Name
Description
Configuration
OBJ 029
Binary input 1:
Short operation -
Switch
This object appears if the input is
set to “dimming”. This object is
transmitted if the pulse on the
external input is of at least 50mS
and no longer than 500mS is
detected on external input
The action depending on parameter
and can be:
“on”
“off”
“toggle
1 bit
1.001
C - W T
OBJ 029
Binary input 1:
Short operation –
Stop/Step
This object appears if the input is
set to “shutter”. This object is
transmitted if the pulse on the
external input is of at least 50mS
and no longer than 500mS is
detected on external input 1. Action
on rising edge. The action can be
“Stop/down”, “Stop/Up” or
“Stop/Toggle Up/Down” depending
on parameter.
1 bit
1.001
C - W T
OBJ 030
Binary input 1:
Switch
This object appears if the input is
set to “switching”. The object is
transmitted if the pulse on the
external input is at least 50mS with
no maximum duration.
Action on rising edge and falling
edge:
Rising – On
Rising – Off
Rising – Toggle
Rising – On, Falling – Off
Rising – Off, Falling - On
1 bit
1.001
C – W T
OBJ 030
Binary input 1:
Long operation -
Dimming
If the external input is high for
more than 500mS, then the
telegram will dim up, down or
up/down.
The action can be:
Dim darker
Dim brighter
Dim brighter/darker
4 bit
3.007
C - W T
OBJ 030
Binary input 1:
Long operation –
Up/Down
If the external input is high for
more than 500mS, then the
telegram will move the shutter up,
down or toggle (depending on
parameter).
The action can be:
“Up”, “Down” or “Toggle Up/Down”
4 bit
3.007
C - W T