BX-240 • 15
© Box 73 Amateurfunkservice GmbH 2017
n
Setup Mode
The following settings options are includ-
ed in a separate menu as they are rarely
used in practice. They are accessible via
Operating Mode
Æ
Setup
. The middle and
right buttons are used to set up the re-
quired option, the left one is used to con-
firm the selection. After changing a pa-
rameter, the analyzer automatically returns
back to the last test mode.
SOL All Frequencies
This menu item has already been covered
in the
calibration section
(
SOL compensa-
tion
).
Frequency values for 5 band
measurement
After selecting the menu item (
Operating
Mode
Æ
Setup
Æ
5 Band Frequencies
),
the first of the five frequencies is available
for an input or a change (
f
1
). To do this use
the left (
D/S
) button to set the position in-
dicator to the position of the frequency
value to be changed and the plus and mi-
nus buttons to correct. By jumping from
the last point on the left to the first point on
the right (1 Hz) the abbreviation
ENT
for
‘enter’ (input) appears. Pressing the plus or
minus key now stores the set value for
f
1
and jumps to the frequency input for
f
2
.
This is repeated up to frequency
f
5
(Fig.
26).
Having confirmed the last frequency the
analyzer returns to the previous test mode.
Language
This option allows the use of German or
English for the menus and measurement
displays (Fig. 27).
Fig. 26: Setting the frequency
f
1
, to the right
the abbreviated
ENT
can be seen; pressing
the plus or minus button the frequency value
for
f
2
is displayed and can be altered and so
on for
f
3
.
Fig. 27: Menu language setting possibilities
