background image

Page 6   

 

 

 

 

 

 

        XO1 Operators Manual 

Introduction 

 

 

 

 

 

 

 

 

 

The XO1 is a powerful DSP based audio processor, ideally suited for live sound 
applications, where it combines the functions of a multitude of conventional products 
in a compact 1U unit.  To achieve this, the XO1 has two inputs and six outputs which 
can be configured in five basic crossover modes – 3 x 2 way; 2 x 3 way; 4 way; 5 way; 
and 6 way. 
 
Each input has a gain control, and variable base delay.  Each output has a gain control, 
variable delay, high and low pass filters, five bands of fully parametric equalisation, 
polarity switching and, additionally, a fully featured limiter. 
 
Multi-part security lock-out is available for all controls. 
 
The XO1 is also available with optional AES/EBU digital inputs and outputs. 
It has been designed for quick, intuitive adjustment through the use of multiple 
controls to provide an easy-to-use interface.   
 
 

Features

Superb audio quality – carefully optimised double precision signal processing coupled 
with a 40-bit internal data path ensures a dynamic range in excess of 110dB.  The high 
sampling rate means minimal filtering providing exceptional sonic purity. 
 
A flexible 2-input/6-output multi-mode format caters for any crossover configuration, 
regardless of scale. 
 
A total of 30 parametric equalisation bands are available, each pro15 to –
30dB of gain at centre frequencies between 20Hz and 20kHz, with a wide range of 
‘Q’s available between 0.4 to 128.  All parameters feature fine resolution with 1/36 
octave frequency steps, 0.1dB gain increments, and 100 ‘Q’ settings.  Any parametric 
section can also be set to operate as a high or low shelving filter. 
 
Each output features a high performance limiter, provided with complete control 
over attack, release and threshold parameters.  To aid set-up, the output meters 
show headroom to the limiter threshold, and use time constants that track those of 
the limiter to display precise power usage. 

Summary of Contents for XO-1











































Reviews: