System
bintec User’s Guide
3
System Menu
1
1
System Menu
The fields of the
S
YSTEM
menu are described below.
The
S
YSTEM
menu is used for e.g. entering the basic system data of your gate-
way.
The
S
YSTEM
menu consists of the following fields:
R232bw Setup Tool Funkwerk Enterprise Communications GmbH
[SYSTEM]: Change System Parameters MyGateway
System Name r232bw
Local PPP ID (default) r232bw
Location
Contact BINTEC
Syslog Output on Serial Sonsole no
Message Level for the Syslog Table info
Maximum Number of Syslog Entries 20
Maximum Number of Acctlog Entries 20
External Activity Monitor >
External System Logging >
Schedule & Monitor >
Password Settings >
Time and Date >
SAVE CANCEL
Field
Description
System Name
Defines the system name of your gateway; is
also used as PPP host name. Appears as input
prompt when logging in to the device.
The device type is entered as default value.
Local PPP ID (default)
This entry is necessary to identify your gateway
if the remote gateway requests the PPP ID
before the gateway has identified itself to the
remote terminal.
The device type is entered as default value.
Summary of Contents for bintec R230a
