Mounting modules
They may be electrostatically charged. Before opening the system, you must discharge yourself by touch-
ing an earthed conductive object (e.g. water pipe).
Mounting modules for module slots 7-8
The image shows an example for the module slot 8 (Slot 8).
1
Module for slot 8 (Slot 8).
2
Module plug socket in the elmeg hybird
300housing.
3
Module screws into the ground bus.
• Plug module plug from above into the module plug socket
2
in the elmeg hybird 300 basic module.
• Screw the module into the ground bus
3
.
The module must always be screwed into the elmeg hybird 300 ground bus.
Mounting modules in mounting frame (elmeg hybird 600)
Insert the RJ45 terminal strip of module
»
MC RJ45
«
2 from behind through the mounting frame opening 1 and se-
cure with two screws to mounting frame 3 . Next, insert the module (e.g. M 4 S/U+4 U) through the rear mounting
frame opening and into the connector strip of module “MC RJ45
"
, then secure with the two screws 3 to the mounting
frame.
Mounting modules
Mounting modules in mounting frame (elmeg hybird 600)
17
Sieckmann
2
1
3
3
