VNS 102V2
11/2009
20
(GB) English
All adjustments during commissioning and servicing are mainly performed via the
control interface and/or the website, but always while the device is closed. The device
may only be opened in the factory by trained and authorised personnel to prevent long-
term damage and failure of the cooling system!
The warranty will be void in case of damage caused by non-compliance with the
operating instructions or opening the device.
We will not assume any liability for consequential damage!
•
The VNS 102V2 may only be used according to purpose and not operated outside of its specified operating
and ambient conditions.
•
Only authorised experts may assemble the VNS 102V2.
•
Observe the valid safety and accident prevention regulations!
•
Shut off the operating voltage prior to installation or service work.
•
Only original parts may be used for installation and service work.
•
The installation site must be located in a lightning protection zone LPZ 3.
•
The specified minimum bending radiuses of the cables must be observed.
•
The specified interference suppression measures must be observed.
Summary of Contents for plettac VNS 102V2
Page 19: ......
