VNS 102V2
11/2009
34
Special configuration of the "decoder" model
Settings in the window "Transfer" for the
decoder
Activation of the "receive instances" on the
decoder:
Receive video output 1: „Mark "
active
" and
confirm with "apply".
Receive video output 2: „Mark "
active
" and
confirm with "apply".
Now the VNS 102V2 decoder is configured to receive two video signals.
If you now connect the encoder and the decoder with a crossover cable, the video signals on the video inputs of
the encoder are transmitted to the video outputs of the decoder.
Summary of Contents for plettac VNS 102V2
Page 19: ......
