Field
Description
be permitted within a radio cell.
The function is activated by selecting
#/
.
The function is enabled by default.
ARP Processing
Select whether the ARP processing function should be enabled.
The ARP data traffic is reduced in the network by the fact that
ARP broadcasts that have been converted to ARP unicasts are
forwarded to IP addresses that are known internally. Unicasts
are quicker and clients with an enabled power save function are
not addressed.
The function is activated by selecting
#/
.
The function is disabled by default.
Make sure that ARP processing cannot be applied together with
the MAC bridge function.
WMM
Select whether voice or video prioritisation via WMM (Wireless
Multimedia) is to be activated for the wireless network so that
optimum transmission quality is always achieved for time-critical
applications. Data prioritisation is supported in accordance with
DSCP (Differentiated Services Code Point) or IEEE802.1d.
The function is activated by selecting
#/
.
The function is enabled by default.
Max. Clients
Enter the maximum number of clients that can be connected to
this wireless network (SSID)
The maximum number of clients that can register with a wire-
less module depends on the specifications of the respective
WLAN module. This number can be shared across all con-
figured wireless networks. If the maximum number of clients is
reached, no more new wireless networks can be created and a
warning message will appear.
Fields in the Security Settings menu
Field
Description
Security Mode
Select the security mode (encryption and authentication) for the
13 Wireless LAN Controller
Funkwerk Enterprise Communications GmbH
176
bintec Rxxx2/RTxxx2
