The menu Networking->Routes->IP Routes->New consists of the following fields:
Field in the Route Class menu
Field
Description
Extended Route
Select whether the route is to be defined with extended para-
meters. If the function is active, a route is created with extended
routing parameters such as source interface and source IP ad-
dress, as well as protocol, source and destination port, type of
service (TOS) and the status of the device interface.
The function is activated by selecting
#/
.
The function is disabled by default.
Fields in the Route Parameters menu
Field
Description
Route Type
Select the type of route.
Possible values:
•
* ;
(default value): Route to a network.
•
1 / ;
: Is used if no other suitable route is avail-
able.
•
@& ;
: Route to a single host.
Destination IP Ad-
dress/NetmaskDestina-
tion IP Address/Net-
mask
Only for Route Type
@& ;
or
* ;
Enter the IP address of the destination host.
In Route Type =
* ;
, you additionally enter the
corresponding netmask in the second field. If no entry is made,
your device uses a default netmask.
Interface
If necessary, enter the interface to be used for this route.
Network Type
Not for Route Type =
1 / ;
Also select the network type.
Possible values:
•
1%
(default value):
• in the LAN: You define another IP address for the interface.
14 Networking
Funkwerk Enterprise Communications GmbH
186
bintec Rxxx2/RTxxx2
