Field
Description
Join/Prune Interval
Define the frequency at which the PIM Join/Prune messages
are sent on the interface.
The value
means that no periodic PIM Join/Prune messages
are sent on this interface.
Possible values:
to
seconds.
The default value is
.
Join/Prune Hold Time
Define the value entered in the holdtime field of a PIM Join/
Prune message.
This is the time for which a recipient must maintain the Join/
Prune state.
Possible values:
to
'
seconds.
The default value is
.
Propagation Delay
Define the value entered in the Propagation Delay field. This
field is part of the LAN Prune Delay option in the PIM Hello
messages, which are sent on this interface.
Propagation Delay and Override Interval represent the so-called
LAN-Prune-Delay settings. These result in a delay in processing
prune messages for upstream routers.
If the Propagation Delay is too short, the transfer of multicast
packets may be cancelled before a downstream router has sent
a prune override message.
Possible values:
to
'
seconds.
The default value is
.
Override Interval
Define the value that the gateway enters in the Over-
ride_Interval field for the LAN Prune Delay option.
Override Interval defines the maximum time a downstream
router can wait until sending a prune override message.
Possible values:
to
seconds.
The default value is
'
.
16 Multicast
Funkwerk Enterprise Communications GmbH
256
bintec Rxxx2/RTxxx2
