Field
Description
Description
Enter the name of the entry.
Calling Line
Select the ISDN line or SIP account from which the call comes.
The selection depends on the interfaces available and on the
SIP accounts that have been created.
Possible values:
•
,A % =B
: Restricts the entry to the selec-
ted PRI interface.
•
#A % =B
: Restricts the entry to the selec-
ted BRI interface.
•
A- 0%%B
: restricts the entry to the selected SIP ac-
count.
•
0)
: No restriction of the entry.
Called Line
Here you have the option of entering the destination line of the
call.
Possible values:
•
,A % =B
: Restricts the entry to the selec-
ted PRI interface.
•
#A % =B
: Restricts the entry to the selec-
ted BRI interface.
•
A- 0%%B
: restricts the entry to the selected SIP ac-
count.
•
0)
: No restriction of the entry.
Enter either Called Line or Called Address.
If a value other than
0)
is selected, Called Address should
not be used. If Called Line =
0)
and Called Address is not
used, all calls for Called Line are processed.
Called Address
Here you have the option of entering the destination address of
the call.
Enter either Called Line or Called Address. If Called Address
is used, then Called Line =
0)
can be set .
Calling Address Trans- Enter the transformation rule applied to the call numbers.
Funkwerk Enterprise Communications GmbH
20 VoIP
bintec Rxxx2/RTxxx2
403
