Field
Description
Possible values:
•
=
(default value): An external DHCP server with active
CAPWAP option 138 assigns the IP addresses to the APs.
•
/
: Your device, on which the CAPWAP option 138 is
active, assigns the IP addresses to the APs.
IP Address Range
Only for DHCP Server =
/
Enter the start and end IP address of the range. These IP ad-
dresses and your device must originate from the same network.
Slave AP location
Select whether the APs that the wireless LAN controller is to
manage are located in the LAN or the WAN.
Possible values:
•
2%/ 20*"
(default value)
•
; :0*"
The
; :0*"
setting is useful if, for example, there is a
wireless LAN controller installed at head office and its APs are
distributed to different branches. If the APs are linked via VPN,
it may be that a connection is terminated. If this happens, the
relevant AP with the setting
; :0*"
maintains its con-
figuration until the connection is reestablished. It then boots up
and the controller and the AP then resynchronize.
13.3 Slave AP configuration
In this menu, you will find all of the settings that are required to manage the slave access
points.
Funkwerk Enterprise Communications GmbH
13 Wireless LAN Controller
bintec Rxxx2/RTxxx2
163
