In the Wireless LAN Controller->Maintenance->Firmware Maintenance menu, a list of
all Managed Access Points is displayed.
For every access point, you see an entry with a parameter set (Update firmware, Loca-
tion, Device, IP Address, MAC Address, Firmware Version , Status).
Possible values for Status
Status
Meaning
Image already exists.
The software image already exists; no update is required.
Error
An error has occurred.
Running
The operation is currently in progress.
Done
The update is complete.
The Wireless LAN Controller->Maintenance->Firmware Maintenance menu consists of
the following fields:
Fields in the Firmware Maintenance menu
Field
Description
Action
Select the action you wish to execute.
After each task, a window is displayed showing the other steps
that are required.
Possible values:
•
3, &)& &
: You can also start an update
of the system software.
•
- % $ &
: You
can save a configuration which contains the AP status inform-
ation.
Source Location
Select the source for the action.
Possible values:
•
@++ &
(default value): The file is stored respectively
on a remote server specified in the URL.
•
4 & 5 &
: The file is
on the official Funkwerk update server. (Only for Action=
3,!
&)& &
)
•
+5+ &
: The file is stored respectively on a TFTP
server specified in the URL.
13 Wireless LAN Controller
Funkwerk Enterprise Communications GmbH
182
bintec Rxxx2/RTxxx2
