Field
Description
• in the WAN: You define a route without a transit network.
•
%
:
• in the LAN: You define a gateway route.
• in the WAN: You define a route with a transit network.
Local IP Address
Only for Network Type =
1%
Enter the IP address of the gateway to which your device is to
forward the IP packets.
Gateway
Only for Network Type =
%
Enter the IP address of the host to which your device is to for-
ward the IP packets.
Metric
Select the priority of the route.
The lower the value, the higher the priority of the route.
Value range from
to
, The default value is
.
Fields in the Extended Route Parameters menu
Field
Description
Source Interface
Select the interface over which the data packets are to reach
the device.
The default value is
*
.
New Source IP Ad-
dress/Netmask
Enter the IP address and netmask of the source host or source
network.
Layer 4 Protocol
Select a protocol.
Possible values:
4(
,
+4
,
31
,
;
,
-
,
0@
,
?-5
,
2+
,
0)
.
The default value is
0)
.
Source Port
Only for Layer 4 Protocol =
+4
or
31
.
Enter the source port.
Funkwerk Enterprise Communications GmbH
14 Networking
bintec Rxxx2/RTxxx2
187
