For a description of the update procedure, see
on page 16.
4.2 System requirements
Your bintec gateway contains extensive features for encrypted data transfer and Internet
access for both individual users and companies.
For configuration of the device, your PC must meet the following system requirements:
• Microsoft Windows operating system Windows 2000 or higher
• Internet Explorer 6 or 7, Mozilla Firefox Version 1.2 or higher
• Installed network card (Ethernet)
• DVD drive
• TCP/IP protocol installed (see
on page 13)
• High colour display (more than 256 colours) for correct representation of the graphics.
4.3 Preparations
To prepare for configuration, you need to...
• gather the data required for the basic configuration and the Internet connection
• Check whether the PC from which you want to perform the configuration meets the ne-
cessary requirements.
You can also...
• install the Dime Managersoftware, which provides more tools for working with your
device. This installation is optional and not essential for the configuration or operation of
the device.
4.3.1 Gathering data
You can gather the main data for configuration with the Funkwerk Configuration Inter-
face quickly, because you do not need any information that requires in-depth knowledge of
networks.
If necessary, you can use the sample values.
Before you start the configuration, you should gather the data for the following purposes:
• Basic configuration (if your device is in the ex works state)
• Internet access (optional)
Funkwerk Enterprise Communications GmbH
4 Basic configuration
bintec Rxxx2/RTxxx2
11
