Field
Description
entry. This corresponds to the status of the Upstream (S,G)
State Machine in the PIM-SM specification.
Uptime
Indicates the timespan since the entry was generated by the
local router.
Upstream Join Timer
Indicates the remaining time until the local router sends out the
next periodic (S,G) Join message on pimSGRPFIfIndex. In the
PIM-SM specification, this timer is named (S,G) Upstream Join
Timer. If the timer is deactivated, it has the value
.
Shortest Path Tree
Indicates whether the Shortest Path Tree Bit is set, i.e. whether
forwarding via the Shortest Path Tree should take place.
Values in the (S,G,RPT) States list
Field
Description
Multicast Group Ad-
dress
Displays the multicast group address. InetAddressType is
defined in the pimStarGAddressType object.
Source IP Address
Displays the source IP address. InetAddressType is defined in
the pimStarGAddressType object.
Reverse-
Path-Forwarding (RPF)
Indicates the address type of the RPF Next Hop to the RP, or
unknown(0), if the RPF Next Hop is not known.
Uptime
Indicates the timespan since the entry was generated by the
local router.
Upstream Override
Timer
Indicates the remaining time until the local router sends out the
next Triggered (S,G, rpt) Join message on pimSGRPFIfIndex. In
the PIM-SM specification, this timer is named (S,G, rpt) Up-
stream Override Join Timer. If the timer is deactivated, it has the
value
.
24.9.3 Interface-Specific States
The menu Monitoring+PIM+Interface-Specific States includes interface-specific status
information.
24 Monitoring
Funkwerk Enterprise Communications GmbH
524
bintec Rxxx2/RTxxx2
