9
ATTACH FIREMANS POLE
1. Fully insert firemans pole extension
tube into long tee on swing bar.
2. Fully tighten grub screws.
1. Check level and square.
2. Hammer in pegs on re-installed swing leg,
twirly whirly bar and newly installed 4 hole
firemans pole base plates.
NOTE: To reduce movement in your frame
load your twirly whirly bar as per original
frame assembly instructions or refer to website
www.funkymonkeybars.com/pages/videos
10
SECURE TO GROUND
Page 9
Hammer in pegs x6.
11
PLEASE SKIP TO STEP 18 (page 12.) FOR FINAL ASSEMBLY INSTRUCTIONS
+ 360
o
Tighten all grub screws.
Firemans pole from step 3.
