Slide long tee onto lowered
swing leg from step 13, and
tighten grub screws.
Ensure leg is not over inserted -
& is level with side hole.
1x
Long Tee
D-104
14
ATTACH LONG TEE
Page 10
ASSEMBLY INSTRUCTIONS - POSITION ‘B’ INSTALLATION
12
THE FOLLOWING STEPS 13-17 ARE FOR THE FIREMANS POLE
POSITION OPTION ‘B’.
Please refer to page 8 for position option ‘A’. For drawing clarity the selected install location shown is the same as position A.
13
REMOVE ELBOW FROM LEG
Loosen grub screw and
remove elbow from lowered
swing leg , step 5.
Swing leg.
Elbow.
Remove elbow.
Attach long tee.
