Swing leg.
Twirly whirly.
4
REMOVE PEGS & LOOSEN ELBOW FITTING
Page 7
5
LOWER LEG TO GROUND
1. Remove pegs from twirly whirly base
plate and swing leg on selected
firemans pole install location.
2. Loosen grub screw connecting swing
leg to swing bar on selected firemans
pole install location.
Lower loosened leg and
twirly whirly to the ground
ASSEMBLY INSTRUCTIONS - EXISTING FRAME PREPARATION
NOTE: If you are installing with a cargo net in place
simply leave the leg and twirly whirly loose in
position. Refer to cargo net instructions.
Loosen grub screw.
Remove pegs x2.
