Page 5
ASSEMBLY INSTRUCTIONS - SWING HOOK
Swing Leg
Swing Bar
2
LAY OUT CUBBY SWING SEAT
1. On flat level ground lay out the cubby swing seat.
2. Find the door opening (where there is a larger gap between hanging ropes)
and the zip on the opposite side.
Door Position
Zip
1x
Cubby Swing Seat
2x
+ 360
o
Fully tighten all fitting grub screws and swing hook bolts.
1
INSTALL SWING HOOKS AND TIGHTEN BOLTS
1. Position swing hook on an accessories bar.
2. Loosen any necessary fittings and slide swing hook onto accessories tube into
central location.
Ensure the swing hook is placed away from other approved Funky Monkey Bars®
accessories and is spaced 1200mm apart from any other swing hook or fitting.
3. Fully re-tighten any loosened fittings.
4. Fully tighten swing hook bolts.
FAILURE TO DO SO COULD RESULT
IN SERIOUS INJURY OR DEATH.
Centre or 1200mm min
1x
Swing Hook
Accessories Bar
(Not included)
