6
ASSEMBLE SWINGING CUBBY
1. Fit the cubby canopy over cubby swing
seat by pulling hanging bracket through
top hole ‘A, in cubby canopy.
2. Align the door gap on the cubby
seat with the cubby canopy.
(where there is a larger gap
between the hanging ropes)
2. Ensure the strap at the top of the
canopy is undone (A). and the buckles
under the door access (B) are unclipped.
4. Pull the canopy base under and around
the cubby seat.
1. Ensure swing hook bolts are fully tightened.
Failure to do so can result in
serious injury.
2. Attach hanging fittings as shown.
Ensure all shackles are closed and locked.
Mind your fingers!
7
ATTACH SWINGING CUBBY
Page 8
A
B
Unclip buckles before install.
Undo strap.
Swing Hook
(Installed step 1)
Seat Tent
assembly from step 6
1x
Carabiner
1x
Swivel
Shackle
Door Position
1x
Cubby Canopy
Assembled Cubby
Swing Seat from
step 5
ASSEMBLY INSTRUCTIONS - SWINGING CUBBY
