background image

LOAD RATING

Page 3

QUALITY & INDEPENDENT TESTING

At Funky Monkey Bars® we take the quality of our designs and safety very seriously. All Funky Monkey Bars® frames 

go through a stringent, independent structural testing process prior to being made available for release to our 

customers.

Our frames are designed within the parameters of the Australian Standard for Playground Equipment AS4685.1:2014.

The structural integrity of our frames has been tested for performance through a combination of engineering 

calculations and physical testing.  The tests have been performed by independent, certified structural engineers in 

accordance with Australian Standard for Playground Equipment AS4685.1:2014 and European Standards 

EN1176-1:2008.

The independent testing conducted on The Aerial Tamarin certified the frame to a load rating of 1464kgs or 24 users.

 

Maximum number on accessories bar to be 3 users.

WITNESSED BY:

MODEL

APPROVED BY:

61

24

 LOAD TESTING CERTIFICATION

DATE :

COMMENTS:

DATE OF TEST

1464

DATE :

I hereby confirm all testing was undertaken in accordance with Physical Testing of Structural Integrity

requirements of AS 4685.1: 2014 App C / EN 1176-1:2008° except where noted below;

 

The Aerial Tamarin

21 June 2019

June 2019

Funky Monkey Bars®

Independent Engineer

June 2019

USER LOAD

(KG)

NUMBER

OF USERS

LOAD RATING

(KG)

Summary of Contents for THE AERIAL TAMARIN

































Reviews: