15
6: Press and Hold
ENT
button to can change value. You will use
ADD
or
MINUS
button to change
so value on interface of Betaflight from ~1000 to ~2000. After that press
EXIT
Repeat with another channel.
Next we will setup channels for Moskito.
The AUX channels depending on configuration you Transmitter. We need minimum 6 channel to
Moskito can take off. We recommend you use 7 channels for Moskito:
-
Roll channel
-
Pitch channel
-
Throttle channel
-
Yaw channel
-
ARM channel - ARM enable, your aircraft can fly and contra. You should choose 2 state
-
Flight Mode - switch and select between flight models: Angle, Horizon, Arco.
-
Beeper channel – Look at your Moskito when lost it.
Step4: How to do setup channel and choose switch on transmitter
.
1.
Go to page
Inputs
to configuration input switch and channels.
At Home Screen, press
MENU
and
PAGE
more times to go to page
INPUTS
-
5/12
2.
Use
Minus
button go to channel 5, press and hold
ENT
2 seconds, you will see a tab.
Summary of Contents for Moskito 70
Page 1: ...1 MOSKITO 70 BNB 70 size FPV racer Rev FrSky...
Page 7: ...7...
Page 17: ...17...
Page 20: ...20...