Furman Sound, Inc.
1997 South McDowell Blvd.
Petaluma, California 94954-6919 USA
Phone: 707-763-1010 Fax: 707-763-1310
Web: www.furmansound.com
E-mail: info@furmansound.com
113005
ElitE-20 PF sPECiFiCations
AC Current Capacity:
Input - 20 Amp capacity required
Output - 16-20 Amps RMS * (maximum, all outlets combined - continuous)
Linear Noise Attenuation:
Transverse (Differential) Mode:
>40 dB from 5 kHz. - 100 kHz. >80 dB from 100 Khz. – 1GHz.
(Linear attenuation curve from 0.05 – 100 ohms line impedance)
Transient Voltage Surge Suppression:
120 VAC - Series Multi-Stage Protection - Non-Sacrificial with Zero Ground Contamination.
(188 V peak clamping @ 6000V - 3000A input)
Extreme Voltage Shutdown (>137 VAC)
Telco Cable / Satellite (less than .1dB insertion loss)
Power Consumption:
12 Watts for display and control circuits independent of actual load.
Outlets:
1 (Ultra-Linearly filtered outlet - front panel)
8 (Ultra-Linearly filtered outlets with additional ultrasonic filtering for either video or audio
components)
4 (power factor corrected amplifiler outlets – 4.5 amps RMS reserve - resistive load - over 55
amps peak charge)
Dimensions: 4” H x 17” W x 14.75” D (Standard 1 RU height without feet)
Weight: 18 lbs.
Safety Agency Listing: NRTL-C (pending)
* (Due to the power factor correction circuit, available RMS power varies with the reactance of the load (vector). However, this only affects the circuit breaker for continuous
RMS current draw. Since power amplifiers will require high transient current demands, the Elite-20 PF will never succumb to current compression. Quite the opposite, in fact,
it will buffer the power amplifier’s power supply, while lowering the AC input impedance, allowing power amplifiers to work more efficiently).
