background image

9

H A - 6 A B   /   H A - 6 A B E   M a n u a l

For best results, the input cables plugged into 
the HA-6AB should be shielded. Balanced 
connections should use shielded, twisted-pair 
cable. Headphone cables and speaker cables 
do not need to be shielded, though no harm is 
done if shielded cables  (such as microphone 
cables) are used.

THREE YEAR LIMITED 

WARRANTY

Furman  Sound,  Inc.,  having  its  principal  place 
of  business  at  1997  South  McDowell  Blvd., 
Petaluma, CA 94954 (“Manufacturer”) warrants 
its HA-6AB (the “Product”) as follows:

 

Manufacturer  warrants  to  the  original 

Purchaser of the Product that the Product sold 
hereunder will be free from defects in material and 
workmanship for a period of three years from the 
date of purchase. The Purchaser of the product 
is allowed fi fteen days from the date of purchase 
to complete warranty registration by mail or on-
line at the Furman website. If the Product does 
not conform to this Limited Warranty during the 
warranty  period  (as  herein  above  specified), 
Purchaser shall notify Manufacturer in writing of 
the claimed defects. If the defects are of such 
type and nature as to be covered by this war-
ranty,  Manufacturer  shall  authorize  Purchaser 
to return the Product to the Furman factory or to 
an authorized Furman repair location. Warranty 
claims should be accompanied by a copy of the 
original purchase invoice showing the purchase 
date; this is not necessary if the Warranty Reg-
istration was completed either via the mailed in 

warranty  card  or  on-line  website  registration. 
Shipping charges to the Furman factory or to an 
authorized repair location must be prepaid by the 
Purchaser of the product. Manufacturer shall, at 
its own expense, furnish a replacement Product 
or, at Manufacturer’s option, repair the defective 
Product. Return shipping charges back to Pur-
chaser will be paid by Manufacturer.

 

THE FOREGOING IS IN LIEU OF ALL 

OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING  BUT  NOT  LIMITED TO THE  IM-
PLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE.  
Manufacturer does not warrant against damages 
or defects arising out of improper or abnormal 
use of handling of the Product; against defects 
or  damages  arising  from  improper  installation, 
against defects in products or components not 
manufactured by Manufacturer, or against dam-
ages resulting from such non-Manufacturer made 
products or components. This warranty shall be 
cancelable  by  Manufacturer  at  its  sole  discre-
tion if the product is modifi ed in any way without 
written authorization from Furman Sound. This 
warranty also does not apply to Products upon 
which repairs have been affected or attempted by 
persons other than pursuant to written authoriza-
tion by Manufacturer.

 

THIS WARRANTY IS EXCLUSIVE. The 

sole  and  exclusive  obligation  of  Manufacturer 
shall be to repair or replace the defective Prod-
uct  in  the  manner  and  for  the  period  provided 
above.  Manufacturer  shall  not  have  any  other 

Summary of Contents for HA-6AB













Reviews: