Installation
Unpacking
Before unpacking your unit, inspect the carton for any obvious severe damage to the box and internal protective materials.
If internal damage is likely, contact the carrier who delivered the unit before proceeding with unpacking. If, after unpacking,
shipping damage is evident, contact the carrier. Save all shipping and packing materials. You may need them if you should
ever have to return the unit to the factory for servicing.
The box should contain the IT-Reference 16E i unit, detachable AC cord, rack mount kit, owner’s manual, and warranty
registration card. If anything is missing, please contact Furman Customer Service. Fill out and return your warranty
registration card. Registration is recommended because it can be used to establish whether the unit is within the warranty
period should your original ownership documents be lost, and it assists us in informing you about upgrades or other vital
information.
Safety Information - Warnings
Please read and observe all of the safety and operating instructions before the IT-Reference 16E i is operated. Retain these
instructions for future reference.
• Do not disassemble or modify in any way. No user-serviceable parts inside .
• Keep away from moisture and avoid excessive humidity.
• Do not allow liquids or foreign objects to enter the unit.
• Household lighting equipment may not be connected to the IT-Reference 16E i because their sockets are not designed
for use with symmetrical power and may present a shock hazard. We recommend that only audio, video and computer
processing equipment be connected to the IT-Reference 16E i.
The IT-Reference 16E i should be serviced by qualified service personnel when:
• The power supply cord or plug has been frayed or cut.
• Objects have fallen onto or liquid has spilled into the unit.
• The IT-Reference 16E i has been exposed to rain or other moisture.
• The IT-Reference 16E i does not appear to operate normally, or exhibits a marked change in performance.
• The IT-Reference 16E i has been dropped, or the enclosure damaged.
Power Source
The power source to which the IT-Reference 16E i is connected should be adequate for use at 16 Amps. Though the system
may function with a 10 Amp panel circuit breaker, nuisance circuit breaker tripping could result at your service panel. If your
system includes multi-channel audio power amplifiers that require more than modest power demands, a circuit breaker with
a rating of at least 16 Amps is essential for optimum performance.
Placement
The IT-Reference 16E i is manufactured with four rubber feet for placement on any table, cabinet, shelf, or floor capable of
supporting its 40 kg. weight. These feet may be easily removed with a standard Philips screwdriver when rack mounting
adjacent to other components. Because of the IT-Reference 16E i’s internal shielding, placement or proximity to other
components is not critical, and the IT-Reference 16E i does not produce any appreciable heat under standard use. The IT-
Reference 16E i may also be rack mounted in a standard 19” rack by attaching the IT-Reference 16E i rack ears. These rack
ears (contained within the plastic rack kit package) are attached to the chassis by removing the (3) countersunk screws on
each forward-side of the chassis top cover. Each rack ear is installed with pan-head Philips screws contained within the IT-
Reference 16E i rack mounting kit. Due to the weight of the IT-Reference 16E i (40 kg.), it is recommended that placement be
at or near the bottom of your rack when mounting this way. For rack mounting that will be transported, rear rack mounting
is recommended due to the high mass of the IT-Reference 16E i. These rear rack kits are not necessary for a stationary
installation. They are available from your Furman dealer as an optional accessory. The rear rack mount kit model number is:
RRM-3 REF
.
